Electroplated Diamond Saw Blades

The electroplated diamond saw blade is made of diamond as abrasive grain by metal electrodeposition. The holding force of electroplating on diamond not only has the mechanical engaging effect but also has intermolecular force. It has high sharpness. The working layer of saw blade contains diamond abrasive grains, and the diamond abrasive is bonded to the substrate by metal bonding agent. First, the thickness of the deposited metal bond is 20% of the height of the diamond abrasive grains(upper sand), and then the diamond abrasive grains are continuously bonded( thickened) with metal bonds to the thickness of 2/3 of the height of the abrasive grains.

Electroplated diamond saw blade application:

Used for cutting granite, marble, cement, ceramic, refractory materials and etc. Applied equipment: hand-held and pneumatic cutting machine, angle grinder and other hand-held devices

Electroplated diamond saw blade features:

  1. It has little effect on the substrate performance, no thermal damage to the diamond, maintains the original strength of the diamond, fully exerts the diamond characteristics, and has high cutting efficiency.
  2. It is suitable for the manufacture of a thin saw blade for fine cutting. No chip.
  3. The holding force of the diamond is good and the diamond is not fall off easily, so that the diamond is fully used. It is stable and does not deform.
  4. Simple production process, short cycle, low cost, rapid and efficient mass production.

Electroplated diamond saw blade specifications:

φ100mm, φ125mm, φ150mm, φ180mm, φ230mm